Home » Elevation Jackscrew Assembly, Azimuth Jackscrew Assembly. »
Product List
Worm Screw Jack
JT Acme Screw Jack
JTC Cubic Screw Jack
JTM Worm Screw Jack
JTW Machine Screw Jack
JSS Stainless Steel Jack
Custom Made Screw Jack
Ball Screw Jack
JTB Ball Screw Jack
JTD Cubic Ball Screw Jack
Bevel Gear Jack
JTS Bevel Gear Jack
Miter Gearbox
JT Miter Gearbox
JTP Miter Gearbox
JTV Miter Gearbox
JTA Miter Gearbox
System Accessories
Screw Jack System
Finished Projects
AC Linear Actuators
Parallel Heavy Duty Linear Actuator
Inline Heavy Duty Linear Actuator
Application
Jacton Industry Co.,Ltd.
Contact: Warren Lee
Skype: jactonjack
T: 86-769-81585810
F: 86-769-81585852
E: sales@screw-jack.com
W: www.screw-jack.com

Elevation Jackscrew Assembly, Azimuth Jackscrew Assembly.
Elevation Jackscrew Assembly, Azimuth Jackscrew Assembly. Periodically inspect lifting screws on jackscrew assemblies to ensure adequate lubrication. Loosen Jackscrew boot clamps to expose the lifting screw assembly. Fully extend jackscrew assembly being careful not to exceed preset mechanical limits. Brush thin coating of grease on exposed lifting screw. Replace boot and attach corresponding boot clamps. If lifting screw is rusty, remove existing lubricant with solvent and wire brush rusted area. Rinse with solvent and apply fresh grease.

satellite dish jack screw

We are professional satellite dish jack screw, satellite dish linear actuators,satellite dish positioner actuator,jacks dish antenna manufacturers and factory.We can produce high quality satellite dish jack screw, satellite dish linear actuators,satellite dish positioner actuator,jacks dish antenna according to your requirements.

satellite dish positioning motor screw jack

We are professional satellite dish positioning motor screw jack, antenna screw jack,jack screw for antenna,screw system for dish manufacturers and factory.We can produce high quality satellite dish positioning motor screw jack, antenna screw jack,jack screw for antenna,screw system for dish according to your requirements.

satellite antenna jack screw

We are professional satellite antenna jack screw, antenna elevation linear actuator,antenna elevation linear actuator,housing cover antenna jack screw manufacturers and factory.

satellite dish elevation adjustment jack screw

We are professional satellite dish elevation adjustment jack screw, actuators for satellite dish,antenna elevation actuator,linear actuator for satellite dish manufacturers and factory.

dish antenna azimuth gear jack

We are professional dish antenna azimuth gear jack, satelite dish worm gear screw jack,satellite dish antenna tracking system,satellite dish antenna elevation actuator manufacturers and factory.

earth station antenna azimuth jack screw assembly

earth station antenna azimuth jack screw assembly with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

jackscrew type antenna drive systems

jackscrew type antenna drive systems with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

jack screws in azimuth and elevation

jack screws in azimuth and elevation with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

electrically driven jack screw for antenna dish

electrically driven jack screw for antenna dish with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

motorized operation jackscrews for earth station antenna

. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

huge jack screws antenna dish elevation adjustments

huge jack screws antenna dish elevation adjustments with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

antenna elevation lifting screw on jackscrew assembly

antenna elevation lifting screw on jackscrew assembly with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton
2. Travel length 1300mm, 1500mm etc. Custom length is available
3. Translating screw with clevis end, or Keyed screw with rod end bearing
3. Geared motor with motor flange which direct-coupled with screw jacks

low backlash gear drive system precision jack screw in elevation

low backlash gear drive system precision jack screw with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled

earth station antennas elevation axes jack screw drive

earth station antennas elevation axes jack screw drive with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled

antennas dish X and Y axises using electric motors driven jack screws

antennas dish X and Y axises using electric motors driven jack screws with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing

parabolic antenna elevation by a motor-driven jackscrew

parabolic antenna elevation by a motor-driven jackscrew with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled.

jackscrew arrangement an electric-motor-operated screw antennas dish

1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

manual or motorized jackscrews in earth station antennas

1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

Extend the azimuth actuator screw by rotating the screw for antennas

Extend the azimuth actuator screw by rotating the screw for antennas are widely used in 4.5m earth station antennas, 6.2m earth station antennas, 7.3m earth station antennas, 9m earth station antennas for azimuth and elevation, which is the perfect solutions for satellite dish antenna tracking system withstanding wind force and weather, self lockin
Page 1 of 1 << Previous 1 Next >>
1st Floor, Building G, No. 5, Hengzhong Road, Xin An Community, Chang An, Dongguan, Guangdong, China.    Phone: 86-769-81585810 | Fax: 86-769-81585852
China Screw Jack,Ball Screw Jack,Machine Screw Jack,Worm Gear Screw Jack,Bevel Gear Screw Jack,Miter Gearbox,Screw Jack Lift System Manufacturer