Home» JTW Worm Screw Jack » Product Detail
Products
THE NAME:

JTW-15T Worm Screw Jack

Model: JTW-15Ton-Wormscrewjack-Tr58x12
Categories: JTW Worm Screw Jack »
Place of Origin: Made In China
Brand Name: JACTON
Download:    
Description:

We are professional JTW-15T Worm Screw Jack, 15 ton worm gear screw jack,worm drive screw jack,worm gear linear actuator manufacturers and factory.

JTW-15T Worm Screw Jack Features
1. Maximum load capacity 15 ton, maximum torque 163 Nm.
2. Lift screw diameter 58 mm, pitch 12 mm.
3. 23:3, 24:1 gear ratios
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, electrical drive screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 2348 mm/min and 750 mm/min.
8. No standard lift screw stroke, maximum travel stroke 2500mm when tension load. 
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple screw jack lift system arrangements are available.

JTW-15T Worm Screw Jack Picture


JTW-15T Worm Screw Jack Specifications


JTW-15T Worm Screw Jack Dimensional Drawing - Translating Screw


JTW-15T Worm Screw Jack Dimensional Drawing - Travelling Nut Rotating Screw


JTW-15T Worm Screw Jack With 90B5 Flange Size - Direct Input Vertical Mount Type


JTW-15T Worm Screw Jack Ordering Information

JTW   -   15T   -   UR  -   300   -   H  -   II   -   C   -   HW

   1             2           3           4         5       6        7          8


1. Jack Brand
JT: "Jacton" brand screw jack
W
 series screw jack


2. Load Capacity
15T: 15 ton load
Before selecting 15T, please check above JTW-15T worm screw jack specifications.

3. Screw Configuration & Mounting Orientation
US:
 Upright translating screw                UK: Upright keyed screw                 UR: Upright rotating screw
IS: Inverted translating screw                 IK: Inverted keyed screw                 IR: Inverted rotating screw


4. Travel Stroke
300, means travel stroke 300mm
We machined lifting screw stroke following buyers requirements


5. Gear Ratio
JTW-15T jack gear ratios include 23:3, 24:1.
H: High gear ratio 23:3, 1.565mm travel length per full turn of worm shaft.                                     
L: Low gear ratio 24:1, 0.5mm travel length per full turn of worm shaft. 

6. Lift Screw End Fittings
JTW-15T jack standard lift screw end fittings includes top plate, clevis end, threaded end, plain end. If you have your own lift screw end fitting design, we can make them following your requirements.


7. Worm Shaft Input Types
A: left side worm shaft input.              
B: right side worm shaft input.             
C: double worm shaft input.
M1: left side motor flange direct input.                                       
M2: right side motor flange direct input. 
M3: left side motor flange direct input, right side worm shaft input.                  
M4: right side motor flange direct input, left side worm shaft input. 


8. Accessories
N:
 No accessory
PP: Protective pipe (lifting screw dustproof and rustproof)
BB: Bellows boot (lifting screw dustproof and rustproof)
HW: Hand wheel (hand operated jack, optional hand crank)
DC: Digital counter or digital position indicator (installed on worm shaft, precision display stroke)
EM: Electric motor (motor driven jack, optional ac motor or dc motor)
GR: Gear reducer (motor driven jack with low speed, optional gear motor, worm gear reducer, helical gear reducer)
LS: Limit switches (control stroke, when full extend or full retract travel, the motor will stop )
SN: Stop nut (installed at the bottom of lifting screw, prevent lifting screw from being removed from the jack housing)
PB: Pillow block bearing (when long distance between jack and jack, which fixes connecting shaft, avoid swing)
FC: Flexible coupling (for shafts connection like connecting shaft and worm shaft)
CS: Connecting shaft (for connecting drive shafts like screw jack lift system)
BG: Miter gearbox (right angle transmit rotary motions, power or torque in screw jack lift system)
SP: Swivel plate or trunnion mounting plates (installed on jack base with swivel pins for pivoting of loads)
SM: Swivel mounting base or trunnion mounting base (matching swivel plate or trunnion mounting plates)


JTW-15T Worm Screw Jack Applications
JTW series screw jack applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.
JTW-15T worm screw jack applications in coil sheet slitter line, paint coating line, corrugated machine, rewinding line, pickling line, cut to length line, electrolytic tinning line process, tension levelling line, continuous galvanizing line, beverage production line, continuous hot dip galvanizing line, continuous laminator line, adjusting synchronous coil feed lines rolls, steel mills line roller adjustment, bridge beams lifting system, continuous rotary blancher, continuous paper filter, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, lower and upper linear freeze-dryer system, steel profiles alignment, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, wide belt grinding machine precise adjustment, open and close a sealed pressure tank, turning over foil coils and metallurgy industry, mining industry, chemical industry, construction industry, irrigation industry.

Previous Product:JTW-20T Worm Screw Jack
Product List
Manual Electric Screw Jack
Electric Screw Jack
Manual Screw Jack
Worm Screw Jack
JT Acme Screw Jack
JTC Cubic Screw Jack
JTM Worm Screw Jack
JTW Machine Screw Jack
JSS Stainless Steel Jack
JTH Compact Screw Jack
Custom Made Screw Jack
Ball Screw Jack
JTB Ball Screw Jack
JTD Cubic Ball Screw Jack
Bevel Gear Jack
High Speed Screw Jack
Quick Lifting Screw Jack
Bevel Gear Ball Screw Jacks
Miter Gearbox
JT Miter Gearbox(T)
JTP Miter Gearbox(Cubic)
JTA Miter Gearbox(Mini)
Hollow Shaft Gearbox
Stainless Steel Gearbox
High Speed Gearbox
Lift System and Accessories
Screw Jack System
Lift System Accessories
Lift System Applications
Linear Actuators
Parallel Linear Actuators
Inline Linear Actuators
Electric Linear Cylinder
Mechanical Linear Actuators
Application
New Site: www.screwliftjack.com
Contact: Warren Lee
Skype: jactonjack
T: 86-769-81585810
F: 86-769-81585852
E: sales@jactonindustry.com
W: www.screw-jack.com

BUILDING 2, NO. 1, DONGCHENG ROAD, CHANG AN, DONGGUAN, GUANGDONG, CHINA    Phone: 86-769-81585810 | Fax: 86-769-81585852
China Screw Jack,Ball Screw Jack,Machine Screw Jack,Worm Gear Screw Jack,Bevel Gear Screw Jack,Miter Gearbox,Screw Jack Lift System Manufacturer