Home» JT Miter Gearbox » Product Detail

JT19 Miter Gearbox

Model: JT19-Mitergearbox-1To1-2To1
Categories: JT Miter Gearbox »
Place of Origin: Made In China
Brand Name: JACTON
JT19 Miter Gearbox Pictures

JT19 Miter Gearbox Descriptions
1. 90 degree angle assembly spiral bevel gears.
2. Used to transmit rotary motion, mechanical power and torque.
3. High efficiency miter gearbox, up to 98%.
4. 1:1 gear ratio and 2:1 gear ratio, customized special gear ratio.
5. Input power from 0.026Kw to 4.94Kw. Drive torque from 31.9N.m to 48.5N.m. Input and output speed from 10 to 1450Rpm (higher speed gearbox, contact Jacton engineers).
6. 19mm diameter input and output shaft, custom made hollow shaft or motor adapter to bolt an IEC motor flange. 42 types shaft arrangements and direction of shaft rotating. Shafts can be rotated in both forward and reverse direction. Clockwise and counter-clockwise rotation direction are available.
7. horizontal mounting, overhung mounting or wall mounting are available.
8. 2 way gearbox, 2 way reverse gearbox, 3 way gearbox, 3 way reverse gearbox, 4 way gearbox are available.
9. low backlash, quiet low noise less than 80dB under 1500rpm at 1 meter distance, low working temperature less than 50 degree centigrade.

JT19 Miter Gearbox Structures and Materials
Structures: gearbox housings, one pair or one pair and a half spiral bevel gears, input shafts, output shafts, bearings, sealings, shafts covers etc.
Spiral Bevel Gears
1. High purity rugged alloy steel 20CrMnTiH material
2. Carburizing process, case hardened and lapped in pairs for intersecting shafts
3. Low noise with grinded spiral teeth, high torque with milled teeth, high rigidity and wear risistance
Input Shafts and Output Shafts
1. Hardened and tempered alloy steel 40Cr material, hanging heavy load capacity With key and keyway
2. Customized stainless steel, chromium coated or other corrosion resistance painting.
3. Customized spline shaft,shaft without key and keyway
Gearbox Housings
1. High rigidity cast iron
2. Customized stainless steel, galvanic coating or other corrosion resistance painting
1. Heavy duty tapered roller bearing
2. Customized reinforced bearings for higher radial and axial load
Oil Seals
1. Double lip oil seal
2. Prevent gear oil leak and dustproof

JT19 Miter Gearbox Specifications

JT19 Miter Gearbox Dimensional Drawing
Note 1: below drawing dimensions for standard soild input and output shaft with 1:1 and 2:1 ratios.
Note 2: Custom made solid input shaft and output hollow shaft.
Note 3: Custom made input IEC flange with solid output shaft.
Note 4: Custom made input IEC flange with output hollow shaft.

JT19 Miter Gearbox Ordering Information

JT  –  19  –  1:1  –  1450R  –  1450R  –  I-LR-O  –  B3

  1        2         3            4                 5                6             7   

1. Gearbox Brand

JT: "Jacton" brand miter gearbox

2. Model
Input and output shaft diameter 19mm
Before selecting JT19 gearbox, please check above JT19 miter Gearbox Specifications 

3. Gear Ratio
1:1 ratio, 2:1 ratio

4 & 5. Input & Output RPM

6. Shaft Arrangements And Direction Of Shaft Rotating
There are 42 type shaft arrangements and direction of shaft rotating for customers selection, please check below 1-LR(O) series, 1-UD(O) series, U-LR(O) series, D-LR(O) series, 1-1-LR(O) series, 1-1-UD(O) series, U-D-LR(O) series shaft arrangements and direction of shaft rotating.
Note: Drive shafts can be rotated in both forward and reverse direction.  
1-LR(O) Series: 1-LR, 1-LR-O, 1-L, 1-L-O, 1-R, 1-R-O shaft arrangements and direction of shaft rotating.
1-UD(O) Series: 1-UD, 1-UD-O, 1-U, 1-U-O, 1-D, 1-D-O shaft arrangements and direction of shaft rotating.
U-LR(O) Series: U-LR, U-LR-O, U-L, U-L-O, U-R, U-R-O shaft arrangements and direction of shaft rotating.
D-LR(O) Series: D-LR, D-LR-O, D-L, D-L-O, D-R, D-R-O shaft arrangements and direction of shaft rotating.
1-1-LR(O) Series: 1-1-LR, 1-1-LR-O, 1-1-L, 1-1-L-O, 1-1-R, 1-1-R-O shaft arrangements and direction of shaft rotating.
1-1-UD(O) Series: 1-1-UD, 1-1-UD-O, 1-1-U, 1-1-U-O, 1-1-D, 1-1-D-O shaft arrangements and direction of shaft rotating.
U-D-LR(O) Series: U-D-LR, U-D-LR-O, U-D-R, U-D-R-O, U-D-L, U-D-L-O shaft arrangements and direction of shaft rotating.

7. Mounting Position
Horizontal Mounting Position
B8: Over Hung Mounting Position
V5: Side Wall Mounting Postion

JT19 Miter Gearbox Applications
JT19 miter gearbox is widely applied in printing press, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, satellite dish antennas, gate valve actuators, business form press, feed screw drive, sewage conveyor, collating machinery, mixing equipment, conveyor drive, film processor and pottle packaging equipment. Whatever your goal is to blend, blow, bottle, crank, cut, convey or the task is to press, propel or raise, JT19 miter gearbox is welcomed and ideal power transmission solution with all these industries.
Previous Product:JT15 Miter Gearbox
Next Product:JT72 Miter Gearbox
Product List
Worm Screw Jack
JT Acme Screw Jack
JTC Cubic Screw Jack
JTM Worm Screw Jack
JTW Machine Screw Jack
Ball Screw Jack
JTB Ball Screw Jack
JTD Cubic Ball Screw Jack
Bevel Gear Jack
JTS Bevel Gear Jack
Miter Gearbox
JT Miter Gearbox
JTP Miter Gearbox
JTV Miter Gearbox
JTA Miter Gearbox
System Accessories
Screw Jack System
Jacton Industry Co.,Ltd.
Contact: Warren Lee
Skype: jactonjack
T: 86-769-81585810
F: 86-769-81585852
E: sales@screw-jack.com
W: www.screw-jack.com

Building C, No.3078, Garden Road, Xin An Community, Chang An, Dongguan 523880, Guangdong, China    Phone: 86-769-81585810 | Fax: 86-769-81585852
China Screw Jack,Ball Screw Jack,Machine Screw Jack,Worm Gear Screw Jack,Bevel Gear Screw Jack,Miter Gearbox,Screw Jack Lift System Manufacturer