Home» JTD Cubic Ball Screw Jack » Product Detail
Products
THE NAME:

JTD10 Cubic Ball Screw Jack

Model: JTD10 Cubic Ball Screw Jack
Place of Origin: Made In China
Brand Name: JACTON
Download:    
Description:


JTD10 Cubic Ball Screw Jack Features
1. Maximum lifting force 10KN, rated dynamic load 10KN.
2. Ball screw diameter 20mm, lead 5mm.
3. High gear ratio 1/5 (1 turn input shaft travels 1mm), low gear ratio 1/20 (1 turn input shaft travels 0.25mm).
4. Ball screw jack with translating screw, rotating screw, keyed screw (square tube) configurations in upright or inverted mounting orientation.
5. High precision, greater efficiency, higher travel speed, higher duty cycle, lower input torque and long service life.
6. Cranked handle operated, or electric motor / geared motor / reducer driven, or both together.
7. Ball screw length is custom made. 
8. Ball screw ends include top plate, clevis end, plain end, threaded end, also custom made acceptable.
9. Individually or multiple ball screw jacks lift system arrangements are available.

JTD10 Cubic Ball Screw Jack Specifications


JTD10 Cubic Ball Screw Jack Dimensional Drawing


JTD10 Cubic Ball Screw Jack Ordering Information

JTD   -   10   -   UR  -   300   -   H  -   II   -   C   -   HW
   1           2         3          4          5       6       7          8


1. Jack Series
JT: "Jacton" brand screw jack
D series cubic ball screw jack

2. 
Load Capacity
10: lifting force 10kN, Before selecting JTD10, please check above JTD10 cubic ball screw jack specifications.

3. Screw Configuration & Mounting Orientation
US:
 Upright translating screw             UK: Upright anti-rotation screw              UR: Upright rotating screw
IS: Inverted translating screw              IK: Inverted anti-rotation screw              IR: Inverted rotating screw
Note: anti-rotation screw with square tube device.


4. Stroke
300, means stroke 300mm.
Ball screw length is custom made.


5. Gear Ratio
Gear ratios include 1/5, 1/20.
H: High gear ratio 1/5, 1mm travel length per full turn of worm shaft.                                     
L: Low gear ratio 1/20, 0.25mm travel length per full turn of worm shaft. 

6. Lift Screw End Fittings
Standard ball screw ends include top plate, clevis end, plain end, threaded end, also custom made acceptable.


7. Worm Shaft Input Types
A: 
single input, left shaft.
B: single input, right shaft.
C: double input shafts.
M1: double input, left shaft, right motor adapter.
M2: single input, right motor adapter.
M3: double input, right shaft, left motor adapter.
M4: single input, left motor adapter.


8. Accessories
N: No accessory
PP: Protective tube (lifting screw dust-proof and rustproof)
BB: Bellows boots (lifting screw dust-proof and rustproof)
HW: Hand wheel (hand operated)
DC: Digital counter or digital position indicator (installed on worm shaft, precision display stroke)
EM: Electric motor (motor driven)
GR: Gear reducer (motor driven with reduction gearbox)
WR: Worm gear reducer (motor driven with worm reduction gearbox)
LS: Limit switches (control stroke, when full extend or full retract travel, the motor will stop )
SN: Stop nut (installed at the bottom of lifting screw, prevent lifting screw from being removed from the jack housing)
PB: Pillow block bearing (when long distance between the supports, pillow block bearing is recommended)
FB: Flange pillow block bearing (when rotating screw jacks with long stroke or unguided, flange pillow block bearing is recommended)
FC: Flexible coupling (interconnections with drive shafts)
CS: Connecting shaft (for connecting drive shafts like screw jack lift system)
BG: Miter gearbox (right angle transmit rotary motions, power or torque in screw jack lift system)
SP: Swivel plate (installed on jack base with swivel pins for pivoting of loads)
RE: Rod end (solar tracking systems is required)


JTD10 Cubic Ball Screw Jack Applications

JTD10 Cubic Ball Screw Jack applications in spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing oven lifts system, feeder leveler, roller adjustment, tunnel ventilation damper adjustment, postform roller elevation, car lifting trolley, extrusion machine, cnc steel leveling machine, blow molding machine, floating glass leveler, curing oven lifts, mobile container lifting gear, moveable swimming pool lifting floor, bolted tank, steel shuttering concrete beams adjustment, caterpillar laminating machine, roller Laminating machine, complete mineral wool processing machinery, sandwich panel handling machinery, vintage industrial crank desk and anywhere required raising, lowering, pulling, pushing and rolling linear motions.
Previous Product:JTD5 Cubic Ball Screw Jack
Product List
Worm Screw Jack
JT Acme Screw Jack
JTC Cubic Screw Jack
JTM Worm Screw Jack
JTW Machine Screw Jack
Ball Screw Jack
JTB Ball Screw Jack
JTD Cubic Ball Screw Jack
Bevel Gear Jack
JTS Bevel Gear Jack
Miter Gearbox
JT Miter Gearbox
JTP Miter Gearbox
JTV Miter Gearbox
JTA Miter Gearbox
System Accessories
Screw Jack System
Application
Jacton Industry Co.,Ltd.
Contact: Warren Lee
Skype: jactonjack
T: 86-769-81585810
F: 86-769-81585852
E: sales@screw-jack.com
W: www.screw-jack.com

Building C, No.3078, Garden Road, Xin An Community, Chang An, Dongguan 523880, Guangdong, China    Phone: 86-769-81585810 | Fax: 86-769-81585852
China Screw Jack,Ball Screw Jack,Machine Screw Jack,Worm Gear Screw Jack,Bevel Gear Screw Jack,Miter Gearbox,Screw Jack Lift System Manufacturer