Home» JTC Cubic Screw Jack » Product Detail

JTC200 Cubic Screw Jack

Model: JTC200kN-Cubicscrewjack-Tr70x10
Categories: JTC Cubic Screw Jack »
Place of Origin: Made In China
Brand Name: JACTON
JTC200 Cubic Screw Jack Pictures

JTC200 Cubic Screw Jack Features

1. Lifting Force 200kN. Under max. lifting force, drive torque high speed 146Nm, low speed 47.75Nm.
2. Acme screw diameter 70 mm, pitch 10 mm. Gearbox sizes 240x220x165mm. Center height 82.5mm, center distance 80mm. Worm shaft diameter 30mm.
3. High gear ratio 1/10, low gear ratio 1/40.
4. Translating screw, rotating screw with copper traveling nut, anti-rotation keyed screw configurations in upright or inverted mounting orientation.
5. Precision positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Hand-operated screw jack by handle or crank, motorised screw jack by 3-phase or single phase motor or gear motor.
7. No standard acme screw travel length, all acme screw travel length is processed according customers requirements. 
8. Amce screw end fittings includes top plate (I), clevis end (II), plain end(III) and threaded end (IV). Custom made spherical hinge, forked head etc.
9. Individually or multiple jtc200 cubic screw jack lift system arrangements are available.

JTC200 Cubic Screw Jack Specifications

JTC200 Cubic Screw Jack Dimensional Drawing

JTC200 Cubic Screw Jack Ordering Information

JTC   -   200   -   UR  -   300   -   H  -   II   -   C   -   HW
   1            2            3          4         5       6        7         8

1. Jack Series
JT: "Jacton" brand screw jack
C series cubic screw jack

Load Capacity
200: lifting force 200kN, only for thrust load.
Before selecting JTC200, please check above JTC200 cubic screw jack specifications.

3. Screw Configuration & Mounting Orientation
 Upright translating screw                UK: Upright keyed screw                 UR: Upright rotating screw
IS: Inverted translating screw                 IK: Inverted keyed screw                 IR: Inverted rotating screw

4. Travel Stroke
300, means travel stroke 300mm
No standard travel stroke, JTC200 cubic screw jack travel stroke produced following your require travel length.

5. Gear Ratio
JTC200 cubic screw jack gear ratios include 1/10, 1/40.
H: High gear ratio 1/10, 1mm travel length per full turn of worm shaft.                                     
L: Low gear ratio 1/40, 0.25mm travel length per full turn of worm shaft. 
Custom made medium speed ratio 1/20, 0.5mm travel length per full turn of worm shaft. 

6. Lift Screw End Fittings
JTC200 cubic screw jack standard acme screw end fittings includes top plate (I), clevis end (II), plain end(III) and threaded end (IV). Custom made spherical hinge, forked head etc. If special lifting screw end fitting needed, please send us the end fitting drawings, we will make them following the drawings.

7. Worm Shaft Input Types
A: left side worm shaft input.              
B: right side worm shaft input.             
C: double worm shaft input.
M1: right side motor flange direct input, left side worm shaft input.                                       
M2: right side motor flange direct input. 
M3: left side motor flange direct input, right side worm shaft input.                  
M4: left side motor flange direct input. 

8. Accessories
N: No accessory
PP: Protective tube (lifting screw dust-proof and rustproof)
BB: Bellows boots (lifting screw dust-proof and rustproof)
HW: Hand wheel (hand operated)
DC: Digital counter or digital position indicator (installed on worm shaft, precision display stroke)
EM: Electric motor (motor driven)
GR: Gear reducer (motor driven with reduction gearbox)
WR: Worm gear reducer (motor driven with worm reduction gearbox)
LS: Limit switches (control stroke, when full extend or full retract travel, the motor will stop )
SN: Stop nut (installed at the bottom of lifting screw, prevent lifting screw from being removed from the jack housing)
PB: Pillow block bearing (when long distance between the supports, pillow block bearing is recommended)
FB: Flange pillow block bearing (when rotating screw jacks with long stroke or unguided, flange pillow block bearing is recommended)
FC: Flexible coupling (interconnections with drive shafts)
CS: Connecting shaft (for connecting drive shafts like screw jack lift system)
BG: Miter gearbox (right angle transmit rotary motions, power or torque in screw jack lift system)
SP: Swivel plate (installed on jack base with swivel pins for pivoting of loads)
RE: Rod end (solar tracking systems is required)

JTC200 Cubic Screw Jack Applications

JTC200 cubic screw jack applications in spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing oven lifts system, feeder leveler, roller adjustment, tunnel ventilation damper adjustment, postform roller elevation, car lifting trolley, extrusion machine, cnc steel leveling machine, blow molding machine, floating glass leveler, curing oven lifts, mobile container lifting gear, moveable swimming pool lifting floor, bolted tank, steel shuttering concrete beams adjustment, caterpillar laminating machine, roller Laminating machine, complete mineral wool processing machinery, sandwich panel handling machinery, vintage industrial crank desk and anywhere required raising, lowering, pulling, pushing and rolling linear motions.
Previous Product:JTC250 Cubic Screw Jack
Product List
Worm Screw Jack
JT Acme Screw Jack
JTC Cubic Screw Jack
JTM Worm Screw Jack
JTW Machine Screw Jack
Ball Screw Jack
JTB Ball Screw Jack
JTD Cubic Ball Screw Jack
Bevel Gear Jack
JTS Bevel Gear Jack
Miter Gearbox
JT Miter Gearbox
JTP Miter Gearbox
JTV Miter Gearbox
JTA Miter Gearbox
System Accessories
Screw Jack System
Jacton Industry Co.,Ltd.
Contact: Warren Lee
Skype: jactonjack
T: 86-769-81585810
F: 86-769-81585852
E: sales@screw-jack.com
W: www.screw-jack.com

Building C, No.3078, Garden Road, Xin An Community, Chang An, Dongguan 523880, Guangdong, China    Phone: 86-769-81585810 | Fax: 86-769-81585852
China Screw Jack,Ball Screw Jack,Machine Screw Jack,Worm Gear Screw Jack,Bevel Gear Screw Jack,Miter Gearbox,Screw Jack Lift System Manufacturer