Home» Lift System Accessories » Product Detail

Planetary Speed Reducer

Model: HF200-HF313
Place of Origin: Made In China
Brand Name: JACTON
When low rpm motorized screw jack or low lifting speed electric driven screw jack systems needs gear reduction mechanism with high quality, high precision, high power, high torque, made in Taiwan "SANYA" Brand Planetary Speed Reducer will be the best choices. Planetary Speed Reducer utilizes flanges to connect and assemble together, and is compatible with the Global IEC standard motor combination. It also can be applied with other speed adjustment equipment, which can be easily replaced, assembled and dismantled.

Characteristics Of A Planetary Speed Reducer
The transmission of planetary speed reducers differs from that of typical traditional gears. Traditional gears are only driven by the engaged surfaces between large and small gears and all the loadings are concentrated on the contact point, which tends to wear and crack the gears easily. In the case of high-speed ratio, more couples of engaged gears are required for multiple stages. This not only takes a large amount of space but also generates more abrading attrition. The clearance between the couple of engaged reducer gears in each stage also accumulates, and all the above reduce the efficiency greatly.

When the planetary speed reducer drives, the sun gear, planetary gears and internal gear ring are loaded on six contact points and are in mesh with internal gear trajectory to evenly distribute the impact load spread out over 360 degrees. This can reduce the abrasion between gears and prevent the gears from cracking. Planetary gears rotate in a floating way so their clearance is almost insignificant. Each stage of speed reduction will only need the engagement of intermittent gears, so the volume is relatively minimized and the maximum efficiency can reach up to 97%.

Characteristics Of A Planetary Speed Reducer Parts Structure
Planetary Speed Reducer Parts Structure includes housing, output shaft, oil seal-output shaft, bearing-output shaft, sun nut, planetary carrier, internal gear ring, planetary gear, using connected section's gear, needle roller pin, sun gear input shaft, snap ring, bearing-input shaft, oil seal-input shaft, input flange, o-ring, breather plug, key-output shaft, washer, hex socket cap screw etc.

An internal gear ring is firmly attached to the gearbox housing. There is an external power to drive the sun gear located in the center of the internal gear ring. Between two parts, there is a planetary gear set consisting of three gears that are equally assembled onto the carrier. This set of planetary gears are supported by an output shaft, internal gear ring and sun gear to float among them. When the power of the output end drives the sun gear, the sun gear can drive planetary gears to self rotate and follow the trajectory of the internal gear ring to perform the revolution around the center. The rotation of planetary gears will drive the output shaft connected with the carrier to transmit power.

Planetary Speed Reducer Motor Dimension

Planetary Speed Reducer Order Numbering Example

Planetary Speed Reducer HF Horizontal Flange Type Dimensions

Planetary Speed Reducer VF Vertical Flange Type Dimensions

Next Product:12V 24V DC Motor
Product List
Manual Electric Screw Jack
Electric Screw Jack
Manual Screw Jack
Worm Screw Jack
JTC Cubic Screw Jack
JTM Worm Screw Jack
JSS Stainless Steel Jack
JT Acme Screw Jack
JTW Machine Screw Jack
Through Holes Screw Jack
Custom Made Screw Jack
Ball Screw Jack
JTB Classic Ball Screw Jack
JTD Cubic Ball Screw Jack
Bevel Gear Jack
Bevel Gear Acme ScrewJack
Bevel Gear Ball Screw Jack
Quick Lifting Screw Jack
Miter Gearbox
JT Classic Miter Gearbox
JTP Cubic Miter Gearbox
JTA Alu. Miter Gearbox
Lift System and Accessories
Screw Jack System
Lift System Accessories
Lift System Applications
Linear Actuators
LAP Electric Linear Actuator
LA Electric Linear Actuators
JTE Classic Electric Cylinder
Mechanical Linear Actuators
JCA Cubic Electric Cylinder
Jacton Industry Co.,Ltd.
Contact: Warren Lee
Skype: jactonjack
T: 86-769-81585810
F: 86-769-81585852
E: sales@jactonindustry.com
W: www.screw-jack.com

Building 2, No. 1, DongCheng Road, Chang An, Dongguan, Guangdong, China.    Phone: 86-769-81585810 | Fax: 86-769-81585852
China Screw Jack,Ball Screw Jack,Machine Screw Jack,Worm Gear Screw Jack,Bevel Gear Screw Jack,Miter Gearbox,Screw Jack Lift System Manufacturer