We are professional satellite dish jack screw, satellite dish linear actuators,satellite dish positioner actuator,jacks dish antenna manufacturers and factory.We can produce high quality satellite dish jack screw, satellite dish linear actuators,satellite dish positioner actuator,jacks dish antenna according to your requirements.

We are professional satellite dish positioning motor screw jack, antenna screw jack,jack screw for antenna,screw system for dish manufacturers and factory.We can produce high quality satellite dish positioning motor screw jack, antenna screw jack,jack screw for antenna,screw system for dish according to your requirements.

We are professional satellite antenna jack screw, antenna elevation linear actuator,antenna elevation linear actuator,housing cover antenna jack screw manufacturers and factory.

We are professional satellite dish elevation adjustment jack screw, actuators for satellite dish,antenna elevation actuator,linear actuator for satellite dish manufacturers and factory.

We are professional dish antenna azimuth gear jack, satelite dish worm gear screw jack,satellite dish antenna tracking system,satellite dish antenna elevation actuator manufacturers and factory.

earth station antenna azimuth jack screw assembly with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

jackscrew type antenna drive systems with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

jack screws in azimuth and elevation with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

electrically driven jack screw for antenna dish with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

huge jack screws antenna dish elevation adjustments with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

antenna elevation lifting screw on jackscrew assembly with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton
2. Travel length 1300mm, 1500mm etc. Custom length is available
3. Translating screw with clevis end, or Keyed screw with rod end bearing
3. Geared motor with motor flange which direct-coupled with screw jacks

low backlash gear drive system precision jack screw with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled

earth station antennas elevation axes jack screw drive with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled

antennas dish X and Y axises using electric motors driven jack screws with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing

parabolic antenna elevation by a motor-driven jackscrew with Below Common Points:
1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled.

1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

1. Jacks load capacity 5 ton, 10 ton, 15 ton, 25 ton.
2. Travel length 1300mm, 1500mm etc. Custom length is available.
3. Translating screw with clevis end, or Keyed screw with rod end bearing.
3. Geared motor with motor flange which direct-coupled with screw jacks.

Extend the azimuth actuator screw by rotating the screw for antennas are widely used in 4.5m earth station antennas, 6.2m earth station antennas, 7.3m earth station antennas, 9m earth station antennas for azimuth and elevation, which is the perfect solutions for satellite dish antenna tracking system withstanding wind force and weather, self lockin