We are offering electric motor screw jack to our clients. It operates with help of electric power and is based on hydraulic mechanism. This electric screw jack is able to give excellent performance for years. Screw Jacks Offering you a complete choice of products which include mechanical jack, worm screw jacks.

Screw jack with motor: A screw jack is a gearbox assembly (either worm gear or bevel gear) and a transmission product (lead screw, ball screw or roller screw) which through use of a motor is used to convert rotary into linear motion.

Electrical jack usually operates in high-load applications. The competing technology at high loads tends to be hydraulics; however, hydraulics are less energy-efficient than electro-mechanical actuation provided by screw jacks.

Electric motor with a screw jack is used in applications where linear motion is required. Lifting of any load, pushing or pulling of mechanical equipment, adjusting of tight clearances of mechanical parts can be done by screw jacks. Mechanical capacity of screw jacks is between 2.5kN and 1000kN.

Electric motors can be directly connected. Compared to hydraulic and pneumatic systems, electric driven screw jacks are preferred for their efficiency and ease of control.

Worm gear screw jacks ( classic and cubical), quick lifting bevel gear screw jacks, Bevel gear boxes can be used as either single drive units or multi lifting systems. Multi lifting Equipment are generally driven by a single motor.

Electric motorized driven screw jack are used for rivers, canals, power station sluice gate lifting projects in Australia and Vietnam, which uses electric motor driven instead of human power starting with a simple manual operation screw jacks.

Screw jacks can be connected directly to an electric motor creating a compact linear drive. Standard 3 phase motors are most common. For lower powers DC motors can be used, or servo motors can achieve high performance.

The level of adjustment accuracy depends mainly on the precision of the screw. Positioning accuracy is influenced, in the case of motor-actuated units, by the electrical control and regulating system, the control system of the brake, and by the adjustment precision of the limit switches Select schematic drive-system layout

When driven by two or more motors sophisticated electrical synchronization and control is required. The Equipment is built using : Worm gear screw jacks, Quick lifting bevel gear screw jacks, Bevel gearboxes, Electric motor, Geared motor, Couplings, Connecting shafts, Bearing blocks, Standard motor flanges, motorized screw jack which is used for

1. Worm gear screw jack �C coupling �C motor in configuration B3 (base-mounted).
2. Worm gear screw jack �C coupling �C IEC flange in configuration B14 or B5 (IEC flange-mounting).
Worm gear screw jacks and quick-lifting screw jacks can be used as either single drive units or multi-screw lifting systems.

Multi-screw lifting systems with electrical synchronization are distinguished by their low requirements in terms of mechanical connecting elements (and therefore lack of running noise), but they do require more sophisticated controls. Precise configuration of the drive motors, in conjunction with a master-slave layout, produces the corresponding

an electric motor drives a worm shaft that causes a worm gear to rotate. The worm gear is provided with a threaded spindle (standard: trapezoidal thread; special version: ball screw) �C and the Screw jack is finished.

Screw Jacks Linear Actuators and lifting jack is an electric motor. Screw jacks come assembled, threaded, and ready for hookup. Connect a motor or hand-crank shaft to the screw jack shaft to lift, hold, position, and level loads.

The motorized or reducible screwed jack is designed so that motor and shaft connection can be made in both directions. The choice of gear unit type, motor type and interconnection shaft types (according) to the load and materials to be lifted is determined by our company.

Electric cylinders and actuators lift and precisely position loads. Requiring only electric power, our actuators are commonly chosen to replace hydraulic and pneumatic cylinders Electric cylinders are available as motorized units designed to meet specific travel distance andtravel speed requirements.

Servo motor mounts for 2.5-ton, 3-ton, 5-ton, and 10-ton worm gear screw jacks and electric cylinders. Easily attach the motor of your choice to either side of your jack. These mounts are compatible with various servo motors but JACTON can provide servo motor mounts to meet your exact specifications.

Motor mounts allow direct coupling to the motor shaft on either the right or the left side of the jack input shaft. For easy installation 2-ton through 20-ton jacks are available with motor mount adapters for standard IEC, or NEMA C-faced motors.

Screw Jacks supplied with motor mounts are available with and without IEC, or NEMA c-faced motors. When motors are included they come with the necessary hardware and coupling keys.

It utilises the property of a screw thread providing a mechanical advantage which means that it can be used to amplify force. The rotary movement can be supplied manually or thanks to the help of hydraulic or pneumatic motors. Or thanks to electric motors, like the induction motor!