Precision micro mechanical actuators screw jacks are specifically designed to provide highly precise lifting, lowering and pivoting of loads. These units feature a cubic housing (machined on all sides) made out of high quality grey cast iron and aluminum, ensuring excellent durability and long service without any need for maintenance (under normal operating conditions).
Handwheel for the emergency adjustment and manual adjustment of worm gear screw jacks or systems. Safety handwheel for the emergency adjustment and manual adjustment of worm gear screw jacks or systems. Safety handwheels decouple themselves to prevent turning with the spindle. Standstill of the handwheel is guaranteed only up to medium speeds.
Universal mounting assures maximum design flexibility. Actuators, gear boxes and prime movers connected by shafting and couplings are mechanically interconnected and thus completely and permanently synchronized. Whether worm gear actuators are used singly, in tandem or in multiple arrangements, flexible couplings are important to transmit power.
Features:1. Compact, Cubic design, Gearbox sizes 60x50x50 mm.
2. Light weight with aluminum housing, and available in ductile iron housing.
1. Upright or inverted installation with maximum static lifting capacity 2.5kN.
2. Self-locking with no need brake or lock mechanisms to hold position.
3. 14mm diameter lifting screw, 4mm lead acme screw (single start acme thread).
4. Available in 5:1 and 20:1 ratios.
5. Custom travel lengths from 10mm to 1500mm.
6. Translating screw (travelling screw jacks), keyed screw for anti-rotation, and rotating screw with traveling nut (travelling nut screw jacks) as the standard configurations.
7. Worm screw is rotated by a hand wheel with handle (mini manual screw jack) or by a electric motor (mini electric screw jack).
Note: Can not directly coupled with motor by motor flange, because of the smallest size gearbox. Can be attached to foot mounted small DC or AC motors with couplings for powered operation.
8. Can be applied either individually use or combined into a exactly synchronized lifting system, linked by connecting shafts, bevel gears and couplings etc.
9. Main components with international standard materials: The main components are trapezoidal lifting screw (worm screw) with C45 steel material, worm gear or travelling nut with bronze material, worm shaft with heat treatment C45 steel material, thrust bearings, grease seals and gear housing with ductile iron.
Different Types of Screw Jacks1. Worm gear maching screw jack with load 1/4 ton - 100 tons, customized larger capacity 250 tons.
2. Worm gear ball screw jack with load 1 ton - 35 tons.
3. Bevel gear screw jack with load 2.5 ton - 50 tons.
Different Versions of Screw Jacks
1. Translating Screw Version: The rotation of the worm gear acts directly on the lift screw and the lift screw translates linearly. Unless the end of the lift screw is fixed (dependent on customer requirements), the lift screw will tend to rotate due to friction between the screw threads.
2. Anti-rotation with Keyed Screw Version: As above but the lift screw is keyed such that it cannot rotate. This is important if the lift screw end is not to be fixed to the load. Both the keyed and un-keyed translating screws are commonly used in applications where more than one screw jack is attached to a common load.
3. Rotating Screw Version: The lift screw is fixed to the worm gear so rotation of the worm gear causes rotation of the lift screw thus translating the nut along the lift screw when the nut is attached to the load.
Advantages of Screw Jacks1. Simple and inexpensive solution in comparison with hydraulic and pneumatic systems.
2. A defined load can be moved to an exact position at a preset speed.
3. Several Screw jacks can be synchronised lifting systems by means of connection shafts and an electronic controller, for example in stage construction.
3. Can be positioned very precisely.
4. They can exert the same forces in both the pushing and pulling direction.
5. An economically very interesting solution compared to pneumatic and hydraulic systems.
6. Many technically ideal and economically interesting solutions can be realised with our modular construction kit concept.
7. Screw jacks are valued by design engineers as standard machine elements.
Applications of Screw JacksScrew Jack is the ideal product to push, pull, lift, lower and position object loads. They are essential components in automated machinery because of high reliability and synchronization. Additionally, screw jack is increasingly finding uses as alternatives to conventionally pneumatic and hydraulic systems.
1. Platform lifting applications
2. Opening and closing of penstocks
3. Industrial process
4. Roll form machinery
5. Food processing machinery
6. Construction sectorMechanical lifting applications
7. Bridge jacks for road and bridge lifting
8.Lift tables
9. Defense industry
10. Stage setup applicationsShipyards
11. Mining industry
12. Gypsum factories
13. Sheet metal forming machinery
14. Paper, press, printing industry
If you have new machines or potential projects and would like to learn more information and price about high quality
Micro screw jack actuators have been used in headbox slice lip profiling applications, contact us today with your requirements. Our teams are looking forward to working with you.
Important Note: most of our standard products with stock components, in other words, in stock and fast delivery.