RX97 RXF97 Helical Gearmotor 5.5kw 7.5kw 11kw 15kw 18.5kw 22kw 30kw Features
1. Torque Range: Up to 600Nm.
2. Input Power Rating: 5.5kw, 7.5kw, 11kw, 15kw, 18.5kw, 22kw 30kw.
3. Transmission Gear Reduction Ratios: 1.42 to 8.23.
4. Input Configuration: IEC motor adapter, solid shaft.
5. Output Configuration: solid shaft with key, hollow shaft.
6. Mounting solution: direct type vertical flange-mounted B5, horizontal type foot-mounted.
7. Carburized and grinded teeth, high load capability, can be added up with other reducers to realize low-speed transmission.
RX97 RXF97 Helical Gearmotor 5.5kw 7.5kw 11kw 15kw 18.5kw 22kw 30kw Dimensions and Motor Power
RX97 RXF97 Helical Gearmotor 5.5kw 7.5kw 11kw 15kw 18.5kw 22kw 30kw Selection GuidesRX F 97 Y 5.5 4P 3.48 M1 0 Φ350
1 2 3 4 5 6 7 8 9 10
1. R: R Series Helical Gearmotor / Helical Gear Reducer
2. Structure Types:* RX: Foot-mounted single-stage helical gearmotors with solid shaft output.
* RXF: Flange-mounted single-stage helical gearmotors with solid shaft output.
* RXS: Foot-mounted, shaft input single-stage helical gearmotors with solid shaft output.
* RXFS: Flange-mounted, shaft input single-stage helical gearmotors with solid shaft output.
3. Sizes: 97 (dimensions above)
4. Motor Code:* Y (Y2): Normal (Renew) 3-phase motors
* B: Explosion-proof motors
* Z: Direct-current DC motors
* YEJ: Brake motors
* D: Multi-speed motors
* YVP: Variable frequency motors
* YCT: Electromagnetic speed regulation motors
* R: Crane and metallurgy motors
* YVPJ: Variable frequency and brake motors
* G: Roller table motors
5. Motor power & 6. Pole & 7. Transmission ratio: see below websites
5.5kw: http://www.screw-jack.com/55kw-helical-gearmotor-specifications.html
7.5kw: http://www.screw-jack.com/75kw-helical-gearmotor-specifications.html
11kw: http://www.screw-jack.com/110kw-helical-gearmotor-specifications.html
15kw: http://www.screw-jack.com/150kw-helical-gearmotor-specifications.html
18.5kw: http://www.screw-jack.com/185kw-helical-gearmotor-specifications.html
22kw: http://www.screw-jack.com/220kw-helical-gearmotor-specifications.html
30kw: http://www.screw-jack.com/30kw-helical-gearmotor-specifications.html
8. Mounting position: M1, M2, M3, M4, M5, M6 (see below picture)
9. Position of the motor thermal box: 0, 90, 180, 270 degrees (see below picture)
10. Outer diameter of output flange: Φ300 and Φ350